Canon MAXIFY iB4060 Online Manual Download Page 113

Page: 113 / 504

Front View

(1) operation panel

Use to change the settings of the printer or to operate it.

Operation Panel

(2) front cover

Open to replace an ink tank or remove jammed paper inside the printer.

(3) paper output tray

Pull out to support printed paper. It will then cover the cassette. Pull out for normal use.

(4) cassette 1

Accepts all sizes of paper compatible with this printer (plain paper, photo paper, envelopes, etc.).

Paper Sources to Load Paper

(5) cassette 2

Accepts A4, Letter, and Legal-sized plain paper.

Paper Sources to Load Paper

(6) output tray extension

Extend to support ejected paper.

(7) paper output support

Open to support ejected paper.

113

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 113 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: