manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 127 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 127

Paper Sources to Load Paper

Page Sizes and Media Types compatible with the printer

Paper can be loaded into two sources, the upper cassette 1 (A) and lower cassette 2 (B).

In the upper cassette 1 (A), all sizes of paper compatible with this printer (plain paper, photo paper,
envelopes, etc.) can be loaded.

In the lower cassette 2 (B), A4, Letter, and Legal-sized plain paper can be loaded.

Media Types You Can Use

You can load the same size of plain paper (A4, Letter, and Legal) in both cassettes, then set the printer to
automatically switch the paper source and feed paper from the other cassette if paper in one cassette
runs out.

Cassette settings

Note

• When printing, be sure to select the correct page size and media type. If the wrong page size and

media type are selected, the printer may feed paper from the wrong paper source or may not print
with the proper print quality.

For details on loading paper in a cassette, see below.

Loading Plain Paper / Photo Paper
Loading Envelopes

Adjusting the cassette according to the Paper

The cassette can be adjusted to three lengths. Press down the lock (C) on the cassette to extend the
cassette.

127

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments