Canon MAXIFY iB4060 Online Manual Download Page 116

Page: 116 / 504

Operation Panel

* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.

(1) LCD (Liquid Crystal Display)

Displays messages, menu items, and the operational status.

(2) ON button

Turns the power on or off.

Turning the Printer On and Off

(3) POWER lamp

Lights after flashing when the power is turned on.

(4) Stop button

Cancels a print job in progress.

(5) Alarm lamp

Lights or flashes when an error occurs.

(6) OK button

Finalizes the selection of a menu or setting item. This button is also used to resolve an error.

(7)

and

buttons

Used to select a menu or setting item.

LCD and Operation Panel

(8) Back button

Returns the screen to the previous screen.

(9) Setup button

Displays the

Setup menu

screen. With this menu, you can perform printer maintenance and change

printer settings.

116

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 116 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: