Canon Macro ring lite MR-14EX II, Instruction Manual

Page: 31 / 260

29
FE (Flash Exposure) lock locks the correct flash exposure setting for
any part of the scene.
While <
a
> is displayed on the LCD panel, press the camera’s
<
B
> button. For cameras without a <
B
> button, press the
<
A
> (AE lock) or <
7
> button.
1 Focus on the subject.
2 Press the <
B
> button.
(
8
)
Aim the center of the viewfinder over
the subject and press the <
B
>
button.
X
The MR-14EX II fires a preflash, and
the flash output required for the
subject is retained in the memory.
X
“ FEL ” will be displayed in the
viewfinder for 0.5 sec.
Each time you press the <
B
>
button, a preflash will be fired and the
new flash output required at that time
is retained in the memory.
7
: FE Lock
N
If a correct exposure cannot be obtained when FE lock is performed, <
Q
>
blinks in the viewfinder. Move closer to the subject, open the aperture,
and perform FE lock again. You can also set a higher ISO speed and
perform FE lock again when using a digital camera.
If the target subject is too small in the viewfinder, FE lock may not be
effective.
COP
Y