Canon M3010 Series, Service Manual

Page: 15 / 133

1
1
1-5
1-5
Product Overview > Parts Name > Control Panel
Product Overview > Parts Name > Control Panel
Cross Section View
[10]
[1]
[11]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[12]
No. Name No. Name
[1] Copyboard Glass [7] Photosensitive Drum
[2] CIS Unit [8] Fixing Film Unit
[3] Separation Pad [9] Fixing Pressure Roller
[4] Pickup Roller [10] Fixing Assembly
[5] Feed Roller [11] Delivery Roller
[6] Transfer Roller [12] Laser Scanner Unit
F-1-3
Control Panel
[1]
[2] [3] [5]
[6] [7] [8]
[4]
No. Name Function
[1] Menu setting lamp (green) Blinking: Menu is being set.
Menu setting key Menu setting mode is entered.
Pressing this key while menu is being set returns to one layer
above.
[2] Density setting amp (green) Blinking: Density is being set.
Lit: When changing from the initial value
Page aggregation setting lamp
(green)
Blinking: Reduced layout/ID Card copy is being set.
Lit: When changing from the initial value
Enlargement/reduction setting
lamp (green)
Blinking: Enlargement/reduction is being set.
Lit: When changing from the initial value
Copy setting key Copy setting items are switched by each press of this key.
[3] - (◄) key The menu items are switched or the setting values are
increased/decreased in the menu setting mode. Also, the
setting values of copy setting items are increased/decreased.
+ (►) key
[4] Stop/reset key The job is stopped.
Pressing this key while menu is being set returns to one layer
above.
[5] Start/OK key Copy operation is started.
In the menu setting mode, the menu items are selected or the
setting values are determined.
[6] Jam occurrence lamp (orange) Blinking: At occurrence of a jam
Lit: At occurrence of a service error
[7] Out of paper lamp (orange) Blinking: When paper on the Pickup Tray runs out
Lit: At occurrence of a service error
[8] Indicator (green) The setting values of copy setting items or the status of this
product are displayed.
F-1-4
T-1-3