Canon LX-MW500 User Manual Download Page 17

Page: 17 / 85

ENGLIS

Controls and functions

Projector

13. AUTO PC

Automatically determines the best picture
timings for the displayed image. See

"Auto-

adjusting the image" on page 38

for details.

14. OK/IMAGE

Enacts the selected On-Screen Display (OSD)
menu item.
Selects an available picture setup mode. See

"Selecting a image mode" on page 42

for details.

15.

Right/

Activates panel key lock. See

"Locking control

keys" on page 46

for details.

When the On-Screen Display (OSD) menu is
activated, the #10, #12, and #15 keys are used as
directional arrows to select the desired menu
items and to make adjustments. See

"Using the

menus" on page 34

for details.

16. INPUT

Displays the source selection bar. See

"Switching

input signal" on page 37

for details.

When you are under the MHL connection

mode and the projector OSD is off, these

buttons are available for controlling your

smart device: arrow keys, OK/IMAGE,

AUTO PC.

10, 12 and 15: arrows keys

Arrows keys are available for controlling

your smart device.

14. OK/IMAGE

Use the key to confirm the selection on the

OSD of your smart device.

13. AUTO PC

Use the key to return or exit the OSD menu of

your smart device.

To enter the MHL connection mode, connect
a MHL device (See

"Connecting a MHL-

compatible smart device" on page 28

for

details.) and switch the input signal to HDMI/
MHL (See

"Switching input signal" on page

for details.).

Attention of the MHL device connection (See

"Connecting a MHL-compatible smart
device" on page 28

for details.)

Focus ring

Adjusts the focus of the projected image. See

"Fine-

tuning the image size and clarity" on page 38

for details.

Zoom ring

Adjusts the size of the image. See

"Fine-tuning the

image size and clarity" on page 38

for details.

Lens shift wheel

Shifts the projection lens vertically. See

"Shifting the

projection lens vertically" on page 25

for details.

POWER indicator light

Lights up or flashes when the projector is under
operation. See

"Indicators" on page 71

for details.

TEMPerature indicator light

Lights up red if the projector's temperature becomes
too high. See

"Indicators" on page 71

for details.

LAMP indicator light

Indicates the status of the lamp. Lights up or flashes
when the lamp has developed a problem. See

"Indicators" on page 71

for details.

MENU

Turns on the On-Screen Display (OSD) menu. Goes
back to previous OSD menu, exits and saves menu
settings. See

"Using the menus" on page 34

for

details.

Top IR remote sensor

POWER (ON/STANDBY)

Toggles the projector between standby mode and on.
See

"Starting up the projector" on page 33

and

"Shutting down the projector" on page 47

for details.

10.

Left

11. BLANK

Used to hide the screen picture. See

"Hiding the

image" on page 46

for details.

12. Keystone/Arrow keys (

/ Up,

/ Down)

Manually corrects distorted images resulting from
an angled projection. See

"Correcting keystone" on

page 39

for details.

12
13

14
15
16

Summary of Contents for LX-MW500






















































































Search results

Summary of Contents for LX-MW500

Reviews:

Canon LX-MW500, User Manual, Page: 17 / 85

Search results

Summary of Contents for LX-MW500

Reviews: