Canon LX-MU700, User Manual

Page: 46 / 90

40
Label Description
Lamp Warning Display Press ◄ or ► to enable or disable the warning message.
Specify whether to show a lamp replacement message after the lamp has
been used for a specified period.
■ Setting display to Off will disable both the message to prepare a
replacement lamp and the warning to replace the lamp. To review the
replacement timing, check the lamp counter.
■ Lamps that are still used after the timing for lamp replacement are
more likely to rupture. Replace the lamp with a new one as soon as
possible.
Lamp 1 Status Shows the current status of Lamp 1.
Lamp 2 Status Shows the current status of Lamp 2.
ALIGNMENT Menu
Label Description
Projection Mode Press ◄ or ► to select a projection mode. The options are Front Table ,
Rear Table , Front Ceiling , Rear Ceiling , Up + Front and Down + Front .
Lens Control Press ENTER to enter the Lens Control menu. See “ Lens Control Menu ”
on page 41 .
Lens Memory Press
ENTER
to enter the
Lens Memory
menu. See “ Lens Memory Menu ”
on page 41 .
Center Lens Press ENTER to set the lens to the default center position.
Note:
Calibrate the lens whenever a lens is mounted on the projector.
Keystone Press ◄ or ► to adjust vertical distortion brought by the projection angle.
Digital Alignment* Press ENTER to enter the Digital Alignment menu. See “ Digital Alignment
Menu ” on page 43 .