47
Menu operation
INPUT menu
SYSTEM SETUP: Basic menu
Function
Description
Auto Search
Allows the projector to automatically search for the signals.
Function
Description
Presentation
Timer
Presentation timer can indicate the presentation time on the screen to help
you achieve better time management when giving presentations.
•
Preset Time
: Sets the time period. If the timer is already on, the timer will
restart whenever the
Preset Time
is reset.
•
Timer Display
: Allows you to decide if you want the timer to show up on the
screen for one of the following time periods:
•
Always
: Displays the timer on screen throughout the presentation time.
•
1 min/2 min/3 min
: Displays the timer on screen in the last 1/2/3
minute(s).
•
Never
: Hides the timer throughout the presentation time.
•
Timer Position
: Sets the timer position.
•
Counting Direction
: Sets your desired counting direction between:
•
Count Up
: Increases from 0 to the preset time.
•
Count Down
: Decreases from the preset time to 0.
•
Sound Reminder
: Allows you to decide if you want to activate sound
reminder. Once enabled, a double beep sound will be heard at the last 30
seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
•
On
/
Off
: Select
On
to activate the timer. Select
Off
to cancel it.
Language
Sets the language for the On-Screen Display (OSD) menus.
Image Flip H/V
The projector can be installed on a ceiling or behind a screen. See
.
Auto Power
Off
Allows the projector to turn off automatically if no input signal is detected after
a set period of time to prevent unnecessary waste of light source power.
Blank Timer
Sets the image blank time when the Blank feature is activated, once elapsed
the image will return to the screen.
Panel Key
Lock
With the control keys on the projector and remote control locked, you can
prevent your projector settings from being changed accidentally (by children,
for example). When the
Panel Key Lock
is on, no control keys on the
projector and remote control will operate except .(
POWER
).
To release panel key lock, press any key of the projector once to display the
panel key lock warning. With the warning being displayed, press
Right/
on the projector or remote control again. (Press and hold the key on the
projector for 3 seconds.).
Keys on the remote control are still in use when panel key lock is enabled. If
you turn off the projector without disabling panel key lock, the projector will
still be in locked status the next time it is turned on.