(7/7)
5. Precautions for Use
-Do not look directly into the projection lens when it is emitting light.
Doing so may result in visual impairment due to the high brightness projection.
- Do not place objects in front of the lens during projection.
Exposing an object to concentrated light for a long period of time may cause it to heat up and start a fire.
- Do not block the intake or exhaust ports during operation.
Doing so may cause heat to build up inside the unit which may result in malfunction or fire.
- When the lamp burns out or reaches its time for replacement, replace it immediately with a new lamp.
This product uses as its light source a high-voltage mercury lamp that deteriorates with use over time
resulting in a decrease in illumination.
The lamp may burst as it deteriorates with use over time.
If the lamp bursts, have the lamp replaced and the unit inspected at a service center.
* The lamp does not always burst, and there is no clear indicator as to the number of hours of use before it bursts.
-
Use the following settings to prevent an increase in internal temperatures in a high altitude
location with low air pressure. (*1)
Doing so may result in visual impairment due to the high brightness projection.
- Use the following settings to prevent an increase in internal temperatures in a high altitude
location with low air pressure. (*1)
Turn on the "High altitude mode".
*1: Elevation above 1500 m
