11
Part Names and Functions
Rear Terminal
②
③
①
④
⑤
⑩
⑥
⑧
⑦
⑨
⑤
S-VIDEO IN
Connect the S-VIDEO output signal from
video equipment to this jack (p.17).
⑦
AUDIO IN
Connect the audio output signal from
video equipment connected to
⑤
or
⑧
to
this jack. For a mono audio signal (a single
audio jack), connect it to the L (MONO)
jack (p.17).
⑨
COMPUTER AUDIO IN 1
Connect the audio output (stereo) from a
computer or video equipment connected
to
②
to this jack (pp.16, 18).
⑧
VIDEO IN
Connect the composite video output signal
to this jack (p.17).
②
COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB
scart 21-pin video output or component video
output to this terminal (pp.16,18).
④
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this
jack (pp.16-18).
This terminal outputs sound from AUDIO IN
terminal (
⑦
or
⑨
).
Never plug headphones into this jack.
①
LAN Connection Terminal
Connect the LAN cable (refer to the user’s
manual of "Network Set-up and Operation").
⑥
CONTROL PORT
When controlling the projector with
RS-232 C, connect the control equipment
to this connector with the serial control
cable.
③
COMPUTER IN 2 / MONITOR OUT
– Connect computer output to this terminal
(p.16).
– This terminal can be used to output the
incoming analog RGB and Component signal
from COMPUTER IN 1/COMPONENT IN
terminal to the other monitor (pp.16,18).
⑩
COMPUTER AUDIO IN 2 (MIC IN)
Connect the audio output (stereo) from a
computer or video equipment connected
to
③
to this jack. Or connect the MIC to
the this jack (pp.16, 18).