Canon LV-5220 - Multimedia Projector SVGA, Functional Specification

Page: 12 / 20

Basic Serial Command Functional Specification Page 11 of 19
6.31. Computer 2 SCART Command
Command “C26” [CR]
Detail
Select SCART RGB input for Computer 2.
However, when Computer 2 terminal is set to Monitor Out, acceptable command is
returned, but does not execute command.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.32. Image (Toggle) Command
Command “C27” [CR]
Detail
Switch Image setting status.
This command works the same as the Remote control’s “IMAGE” button.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.33. On Start Setting Command
Command “C28” [CR]
Detail
Set Power On Start status
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.34. On Start Cancellation Command
Command “C29” [CR]
Detail
Cancel Power On Start status.
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.35. Power Management Ready Command
Command “C2A” [CR]
Detail
Set Power Management to Ready mode.
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.36. Power Management Off Command
Command “C2B” [CR]
Detail
Set Power Management to Off mode.
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.37. Power Management Shut Down Command
Command “C2E” [CR]
Detail
Set Power Management to Shut Down mode.
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]