Canon LBP6310dn Manual Download Page 305

Page: 305 / 452

07K5-063

There are the following two ways to start the Remote UI.

Starting the Remote UI from the Printer Status Window
Starting the Remote UI Directly from a Web Browser

Before starting the Remote UI, see "

Attention (Remote UI)

Starting the Remote UI from the Printer Status Window

Click [

] in the Windows task tray, and then select the printer name.

Select [Remote UI] from the [Options] menu.

If you cannot select [Remote UI]

Check the following points.

The printer and computer are connected properly via a network.
The printer is turned ON.

By logging in as Administrator, you can perform all the operations and settings of the Remote UI.

(1) Enter a password in [Administrator Password].

If the administrator password is not specified, you do not need to enter the password.

"Setting the Administrator Password"

(2) Click [Log In].

Starting the Remote UI

㻟㻜㻡㻌㻛㻌㻠㻡㻞

Summary of Contents for LBP6310dn





































































































































































































































































































































































































































































Search results

Summary of Contents for LBP6310dn

Reviews:

Related manuals for LBP6310dn

Brands by name

Popular brands

Canon LBP6310dn, Manual

Search results

Summary of Contents for LBP6310dn

Reviews:

Related manuals for LBP6310dn

Brands by name

Popular brands