manualshive.com logo in svg

Canon LBP3250 Series, Service Manual, Page: 11 / 98

Share
Download
Canon LBP3250 Series Service Manual Download Page 11

Chapter 1

1-1

1.1 Features

1.1.1 Features

0019-9494

1. Small-size, high-speed monochrome printer
This equipment has a compact body that realizes high-speed print of 23 ppm.

2. Reduction in standby time and energy consumption
This equipment employs on-demand fixing where the heater activates only during printing, resulting in a reduction in standby time and energy consumption on this
mode.
3. Realization of noise reduction and stable image quality
This equipment employs a belt drive method for transmitting the drive of the main motor. This enables lower noise and more stable image quality compared to the
conventional gear drive method. (See MEMO)

4.Improved Usability
In this equipment, the power switch is situated at the front of the host machine, and maintenance (jam removal, replacing the cartridge) can be performed by ac-
cessing one point of the delivery tray.

MEMO:

Changing the drive method from gear to belt reduces uneven pitch due to varied rotation speed of the photosensitive drum, which realizes stable image quality.

Summary of Contents for LBP3250 Series



































































































Reviews:

No comments