manualshive.com logo in svg

Canon LBP3010 Series, Service Manual, Page: 91 / 146

Share
Download
Canon LBP3010 Series Service Manual Download Page 91

Chapter 3

3-13

F-3-32

6) Free the motor harness [2] from the harness guide [1].
7) Remove the motor guide [3].

- 1 screw [4]

F-3-33

8) Remove the main motor [1].

- 2 screws [2]

F-3-34

3.1.9.3 Before Removing the Main Motor

0025-1223

LBP6000 / LBP6000B

1) Remove the Upper Cover. 

(page 3-5)

Reference[Removing the Upper

Cover]

2) Remove the Left Cover. 

(page 3-3)

Reference[Removing the Left Cov-

er]

3) Remove the Right Cover. 

(page 3-2)

Reference[Removing the Right

Cover]

4) Remove the Front Cover. 

(page 3-6)

Reference[Removing the Front

Cover]

3.1.9.4 Removing the Main Motor

0025-1224

LBP6000 / LBP6000B

1) Remove the Scanner Sub Cover [1].

- 1 Screw [2]

F-3-35

2) Remove the Scanner Cover [1].

- 3 Screws [2]

[1]

[1]

[2]

[2]

[1]

[2]

[3]

[3]

[4]

 Points to note at installation

When attaching the laser scanner cover [1], put the shutter lever [2] through 
the hole [3] on the scanner cover.

[2]

[1]

[2]

[3]

[1]

[1]

[2]

Summary of Contents for LBP3010 Series



















































































































































Reviews:

No comments