Canon LBP 3370, Service Manual, Page: 99 / 114

Chapter 5
5-9
F-5-11
5.4.5 Making Connections
0018-3180
LBP3370
Connect the PC to the machine.
[Making Preparations]
Items to Prepare
- PC to which SSTv3.34 or higher and LBP3370 firmware have been installed
- USB cable (USB1.1,USB2.0)
[Procedure]
1) Start up the PC.
2) Connect the machine and the PCB with a USB cable.
F-5-12
4) Turn on the main power as follows to start download mode.
1. While holding down on the Online key (1) and the cancel job key (2), turn on the power.
2. Press the settings key (3) several times; when 'SERVICE MODE' is indicated, press the reset key (4) to start service mode.
3. Press the setttings key (3) several times; when 'F/W UPDATE GR' is indicated, press the reset key (4).
4. Press the setttings key (3) several times; when 'USB' is indicated, press the reset key (4).
5. When 'OK?' is indicated, press the OK key (5) to start download mode.
CONTROL Registerd Firms Found Firm
LBP3370
CONT
XXxxv0102
XXenv0103 >>> Regist
Registered fir mware F i r m wa r e r e g i s t ra t i o n c o m p l e t e d .
> > > B a t c h R e g i s t ra t i o n R e s u l t s
C l i c k a b u t t o n t o exe c u t e .
CONNECT
CANCEL
EXIT
O K
R e g i s t e r F i r m wa r e
D e l e t e F i r m wa r e
D e l e t e B a ck u p D a t a
S y s t e m M a n a g e m e n t
Service Support Tool DLM0 (Ver.3.34E)
LBP3370
CONT
XXxxv0102
XXenv0103
USB cable