Canon LBP 3370 Service Manual Download Page 95

Page: 95 / 114

Chapter 5

5-5

T-5-8

5.4 Version Up

5.4.1 Overview of Upgrading Work

0018-3176

LBP3370

The machine's system software may be upgraded using a PC to which the Service Support Tool (SST) has been installed.

5.4.2 Construction of Firmware

0018-3177

LBP3370

The following shows the composition of the machine's firmware:

T-5-9

F-5-4

5.4.3 Outline of the Service Support Tool

0018-3178

LBP3370

The service support tool (SST, hereafter) provides the following functions:

Number field

Description

Corrective action

D8-00 TO 0C

A fault has occurred in the firmware of the LIPS LX (BLD) translator.

1) Turn on the power.
2) If step 1 fails, replace the controller board.

Firmware

Function

Location

Remarks

cont

Controls overall machine
operation.

Video controller board

Soldered to flash ROM
(IC16)

IC1

J10

IC2

IC1010

IC1009

IC1100

IC1088

IC3004

IC1060

IC16

IC3

IC4

IC9

Flash ROM

(System)

Summary of Contents for LBP 3370



















































































































Search results

Summary of Contents for LBP 3370

Reviews:

Canon LBP 3370, Service Manual, Page: 95 / 114

Search results

Summary of Contents for LBP 3370

Reviews: