Canon LBP-2510 User Manual Download Page 9

Page: 9 / 75

Paper

■

Abbreviation of Paper Size

The following abbreviations are used to indicate the paper size in paper cassettes.

Paper type

Paper source

Multi purpose tray

Cassette 1

Plain paper (64~105 g/m

)

Letter

Executive

Legal

Custom size *

Heavy paper (106~135 g/m

)

Letter

Executive

Legal

Custom size *

Transparencies A4

Label paper A4

Postcard (100 mm

148 mm)

Stamped, self-addressed

postcard (148 mm

200 mm)

Envelop

Youkei No.4

(105 mm

235 mm)

Youkei No.2

(114 mm

162 mm)

Plain paper in the following sizes can be loaded.

Multi purpose tray : 76.2 - 216.0 mm in width,
127.0 - 356.0mm in length
Cassette 1 : 148.5 mm or 182.0 - 216.0 mm in width,
210.0 - 356.0mm in length

Heavy paper in width of 148.5 mm or 182.0 - 216.0 mm in width,

and length of 210.0 - 356.0 mm can be loaded.

Paper size

Legal

Letter

Executive

LGL

LTR

EXEC

Paper guide of the paper cassette

Summary of Contents for LBP-2510












































































Search results

Summary of Contents for LBP-2510

Reviews:

Brands by name

Popular brands

Canon LBP-2510, User Manual

Search results

Summary of Contents for LBP-2510

Reviews:

Brands by name

Popular brands