Canon LBP-1760 Service Manual Download Page 308

Page: 308 / 394

COPYRIGHT

1998 CANON INC. CANON LBP-1760 REV.0 MAY 1998 PRINTED IN JAPAN [IMPRIME AU JAPON]

PREFACE

This Parts Catalog contains listings of parts used in the LBP-1760, the duplex unit,

the envelope feeder, and the paper feeder. Diagrams are provided with the listings to

aid the service technician in clearly identifying the item to be orderd.

Whenever ordering parts, consult this Parts Catalog for all of the information per-

taining to each item. Be sure to include in the Parts Request the full item

description, the item part number, and the quantity. The parts catalog may be

revised if there is significant product modification. For minor product

modifications, a Service Information Bulletin will be issued.

Canon Inc.

Peripheral Products Quality Planning Div.

Peripheral Products Technical Documentation Dept

5-1, Hakusan 7-chome, Toride-shi, Ibaraki 302-8501, Japan

COPYRIGHT C 1998 CANON INC.

Printed in Japan

Imprime

´ au Japon

Use of this manual should be

strictly supervised to avoid dis-

closure of confidential infor-

mation.

Summary of Contents for LBP-1760










































































































































































































































































































































































































Search results

Summary of Contents for LBP-1760

Reviews:

Brands by name

Popular brands

Canon LBP-1760, Service Manual

Search results

Summary of Contents for LBP-1760

Reviews:

Brands by name

Popular brands