64
Error Messages
If the printer is unable to print for some reason, an alarm sounds, the error indicator
lights up and an error message appears on the display. Furthermore, a warning
message is displayed when you are required to take some sort of action, even
though there is no problem with the print job. When these types of messages are
displayed, take the following actions in response.
IMPORTANT
•
When multiple warning messages occur at the same time, the messages are displayed
alternately.
•
When an error message occurs at the same time as a warning message, the warning
message is not displayed.
•
When [
警告表示
] in the set-up menu is set to [
シナイ
], a message with the <
Warning
message
> symbol is not displayed.
•
When a message with the <
Error skip
> symbol is displayed, press [
オンライン
] to bypass
the error and continue printing. However if you do this, print data may be lost or the data
may not be printed correctly. If you want to cancel the procedure, perform a soft reset to
remove the cause of the problem and then press [
オンライン
] to print the data again.
Furthermore, messages with this symbol can be automatically skipped by setting
[
自動エラースキップ
] in the set-up menu to [
ツカウ
].
Message
Cause and Remedy
11 XXX ヨウシガアリマセン
(where XXX is the paper size
abbreviation)
Cause:
The paper size specified in an
application software has not been
loaded in the paper cassette or
paper tray. (When the paper feed
mode is set to [
自動
], this applies to
all paper cassettes and the paper
tray. When the paper mode is fixed,
this applies to a paper cassette or
the paper tray.)
Remedy:
Add paper to the paper source or, if
there is no paper in the paper
source, load paper into it.
12 カバーガ アイテイマス
Cause:
The top cover is open.
Remedy:
Close the top cover firmly.
13 ヨウシガ ツマリマシタ
Cause:
Paper has jammed inside the printer.
Remedy:
Clear the paper jam.
14 EP カートリッジ ナシ
Cause:
The toner cartridge has not been
installed or it has not been installed
correctly.
Remedy:
Install the toner cartridge or re-install
the toner cartridge correctly.
