Canon Ixy Digital 90, Service Manual

Page: 16 / 166

12
LCD Monitor
Type Low-temperature polycrystalline silicon TFT color
Effective Pixels Approx. 230,000 pixels
Display Size IXY DIGITAL 90: 75.0 mm diagonal (3.0-inch type), with wide viewing angle
IXY DIGITAL 10: 63.3 mm diagonal (2.5-inch type), with wide viewing angle
Picture Coverage 100%
Brightness Adjustment 15 levels
Quick-bright LCD Available
Variangle Not available
Focus Control
AF System TTL autofocus
AF Mode Single
Manual Focus Not available
AF Frame AiAF (Face Detect
*1
/9-point) / AF (1-point
*2
)
*1
If no face is detected, 9 points are used.
*2
Fixed to center
AF Lock Available
• Shooting standby only in movie mode.
AF-assist Beam Available
Exposure Control
Metering System Evaluative
*1
, Center-weighted average, Spot
*2
*1
Control to incorporate facial brightness in Face Detect AF.
*2
Fixed to center
Manual Exposure Not available
AE Lock Available
• Shooting standby only in movie mode.
Exposure Compensation
(Still images) ±2 stops in 1/3-stop increments
Exposure Shift (Movies) ±2 stops in 1/3-stop increments
• Shooting standby only.
Program Shift Not available
Safety Shift Not available
ISO Speed
(Standard Output Sensitivity,
Recommended Exposure Index) Auto
*1
, High ISO Auto
*2
, ISO 80/100/200/400/800/1600
*1
Camera automatically sets the optimal speed according to subject brightness.
*2
Camera automatically sets the optimal speed according to subject brightness. However,
the ISO speed is set relatively higher than Auto (maximum ISO speed is ISO 800.)
Auto ISO Shift Available
ND Filter (built-in) Insertion Not available
White Balance
Modes Auto, Day Light, Cloudy, Tungsten, Fluorescent, Fluorescent H, Custom