Canon IXUS V2 User Manual Download

Page: 134 / 147

132

Appendices

Troubleshooting

• Press the ON/OFF button for a

moment.

• Confirm that the battery cover

and CF card slot cover are
securely closed.

• Insert a fully charged battery

into the camera.

• Use a household power source.

• Wipe the terminals with a clean

dry cloth.

• Turn the mode dial to the
or position.

• Wait until the flash charges.

You can press the shutter
button when the indicator
glows a steady orange.

• Insert a new CF card.
• If required, download the

images to a computer and erase
them from the CF card to make
space.

• Format CF card (See

Formatting

CF Cards

p. 89).

• If reformatting doesn’t work,

the CF card logic circuits may be
damaged. Consult the nearest
Canon Customer Support Help
Desk.

Power is not
turned on

Battery cover or
CF card slot cover
is open

Insufficient battery
voltage

Poor contact
between camera
and battery
terminals

Mode switch is set
to (Replay)

Flash is charging

CF card is full

CF card is not
formatted correctly

Problem

Cause

Solution

Camera will not
operate

Camera will not
record

Summary of Contents for IXUS V2




















































































































































Search results

Summary of Contents for IXUS V2

Reviews:

Related manuals for IXUS V2

Brands by name

Popular brands

Canon IXUS V2, User Manual

Search results

Summary of Contents for IXUS V2

Reviews:

Related manuals for IXUS V2

Brands by name

Popular brands