Canon IXUS 160 User Manual Download Page 173

Page: 173 / 216

173

Contents

Chapter Contents

•

[

] may be displayed on the camera to warn you that

the memory card has print settings that were configured

on another camera. Changing the print settings using this
camera may overwrite all previous settings.

Still Images

Adding Images Individually

Choose [Select].

Following the procedure in
“Choosing a Selection Method”
(

172

), choose [Select] and

press the <

> button.

Choose an image.

Press the <

> buttons to

choose an image, and then
press the <

> button.

[

] is displayed.

To remove the image from the
photobook, press the <

button again. [

] is no longer

displayed.

Repeat this process to specify
other images.

When finished, press the

> button to return to the

menu screen.

Summary of Contents for IXUS 160

























































































































































































































Search results

Summary of Contents for IXUS 160

Reviews:

Related manuals for IXUS 160

Brands by name

Popular brands

Canon IXUS 160, User Manual

Search results

Summary of Contents for IXUS 160

Reviews:

Related manuals for IXUS 160

Brands by name

Popular brands