Canon iR1570F, Service Manual

Page: 420 / 494

Chapter 15
15-12
15.2 Service Mode Table
15.2.1 Bit Switch Settings
0006-2856
A bit switch consists of 8 bits, used for registering/setting an item. The switch is configured as follows, and each bit
is always either '0' or '1' :
F-15-9
Do not change service data marked "not used" for its initial setting.
#SSSW-SW01: error/copy control
T-15-5
[Bit 0]
Use it to specify whether or not to generate a service error code. If set to '1', a service error code will be indicated on
the report.
[Bit 1]
Use it to specify whether or not to generate an error dump list. When set to '1', an error dump list will be attached to
an error TX report or a RX report generated in the event of an error.
Bit Function 1 0 Factory setting
0 service error code output do not output 0
1 error dump list output do not output 0
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 user setting restriction do not impose impose 0
SW01
0 0 0 0 0 0 0 0
Bi
t
7
Bi
t
6
Bi
t
5
Bi
t
4
Bi
t
3
Bi
t
2
Bi
t
1
Bi
t
0