Canon iPF755 - imagePROGRAF Color Inkjet Printer, User Manual, Page: 764 / 948

Setting Item Description, Instructions
System
Setup
Detect Mismatch Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type
and size in the printer driver.
Choose
Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing af-
ter notification. Choose None to continue printing
without notification. Choose Hold Job to store jobs
with mismatched types and sizes of paper on the print-
er hard disk, in a print queue awaiting processing.
(See " Using the Printer Hard Disk .")
→P.571
Paper
Size
Basis Roll Selection 1 If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
Roll Selection 2 If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll
of an intermediate width is detected.
Keep Paper Size Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the mar-
gin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the print-
er driver does not match the margin in the printer
menu
TrimEdge Reload Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut the
edge if you are concerned about any marks left on the
roll when the roll is left in the retracted position.
Specify
On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing
Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Control Panel > Printer Menu >
Menu Settings iPF755
9
748