Canon iPF755 - imagePROGRAF Color Inkjet Printer, User Manual, Page: 685 / 948

Output Stacker
Using the Output Stacker ................................................................................................................................
669
Using the Output Stacker
This section describes how to use the Output Stacker.
Note
• The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or the
other of these Stand is included with the printer depending on the region and time when you purchased the
printer.
• The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different
from the appearance of your printer in some cases.
• When storing printed documents on the Output Stacker
Use position (1). For details on how to use the Extended position which is a useful function for retrieving printed mat-
ter, refer to the note regarding the Extended position.
(See " Note regarding the extended position .")
→P.670
• When the Output Stacker is not used, when loading paper, or when moving the printer
Use position (2).
When moving the printer, always lift the Support Rod to Extended position A before putting it in position (2), other-
wise the Basket Cloth may touch the floor and be soiled or damaged.
(See "
Switching to Extended position A
.")
→P.670
Important
• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed
documents may not be dropped into the Output Stacker, and the printed surface may become soiled.
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.
Handling Paper > Output Stacker >
iPF755 Using the Output Stacker
6
669