Canon iPF6100 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 308 / 367

Chapter 7
7-12
7.1.3 Details of Service Mode
0016-8435
This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When a roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
T-7-6
3) HEAD
Displays the following EEPROM information of the printhead.
T-7-7
Display Description Unit
S/N Serial number of printer -
TYPE Type setting on main controller PCB
* iPF6100 is represented by 24. -
LF TYPE Feed roller type: 0 or 1 -
TMP Ambient temperature degrees
C
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
mm
SIZE LF Detected size of loaded media (feed direction)
0 is always detected for the roll media.
inch
SIZE CR Detected size of loaded media (carriage scan direction) mm
SIZE CR Detected size of loaded media (carriage scan direction) inch
Display Description
S/N R Serial number of printhead R
S/N L Serial number of printhead L
LOT R Lot number of printhead R
LOT L Lot number of printhead L