Canon iPF6000S - imagePROGRAF Color Inkjet Printer, User Manual

Page: 77 / 730

Control Panel
System Setup
Setting Item Description, Instructions
Buzzer Set the buzzer. Choose On for the buzzer to sound once for
warnings and three times for errors.
Warning
Detect Mismatch Choose Warning for notication (display of a warning message)
during printing if the type of paper specied in the printer menu
does not match the type in the printer driver. Choose
None to
continue to print without notication. Choose Pause to have
printing paused under these circumstances. In this case, you
can continue printing by pressing the
Online button.
Keep Media Size Choose On to use the paper size setting as the basis for printing
instead of other settings. The margin setting of the printer menu
will be used instead of the margin setting of the printer driver
if the latter is smaller, which may prevent text or images in the
trailing margin from being printed.
Choose Off to use the printer driver settings instead. Even if
the margin setting of the printer driver is smaller than that of the
printer menu, text or images will not be cut off. However, this
requires longer paper because the actual margin will be equal
to the margin setting of the printer driver plus the margin setting
of the printer menu.
Sht Selection If sheet size detection is activated, choose whether ISO A3+
or 13"x19"(Super B) is applied when an intermediate size is
detected.
Roll Selection 1 If roll size detection is activated, choose whether ISO A3
(297mm) or 300mm Roll is applied when a roll of an
intermediate width is detected.
Paper Size Basis
Roll Selection 2 If roll size detection is activated, choose whether 10in. (254mm)
or JIS B4 (257mm) is applied when a roll of an intermediate
width is detected.
TrimEdge Reload When Automatic is selected, the leading edge will be cut as
needed, taking into account how long the paper has been
loaded without being printed. (However, it is not cut if
Cutting
Mode is set to Manual .)
Choose On to cut the leading edge.
Noz. Check Freq. Specify the timing for automatic checks of nozzle clogging.
Choose
1 page to check once per printed page. Choose 10
pages to check once per ten printed pages. Choose Automatic
to have the printer automatically adjust the timing for checks
based on the frequency of nozzle use.
Printer Parts 63