Note: If the Stop/Reset button is pressed 15 or more times, the Alarm or Power LED lights steadily without any
changes.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the
destination listed in the table below, and press the Power button.
Note: After setting the destination, be sure to initialize the EEPROM. The destination setting may not
be valid unless the EEPROM is initialized after destination settings.
Confirm the model name and destination in service test print or EEPROM information print.
information print.
3 times
Orange (Alarm) EEPROM initialization
4 times
Green (Power)
Waste ink counter
resetting
5 times
Orange (Alarm) Destination settings
After entering the destination settings mode,
press the Stop/Reset button the specified
number of time(s) to select the destination. For
detail, see "Destination settings procedures"
below.
6 times
Green (Power)
Print head deep
cleaning
(Cleaning of both black and color)
7 times
Orange (Alarm) LF correction
Not used in servicing.
8 times
Green (Power)
CD / DVD check
pattern print
9 times
Orange (Alarm) CD / DVD print
position correction
(horizontal: X
direction)
Not used in servicing.
10 times
Green (Power)
CD / DVD print
position correction
(vertical: Y direction)
Not used in servicing.
11 times
Orange (Alarm) Button and LCD test
12 and 13
times
Green, Orange
(Power, Alarm)
Return to the menu
selection
14 times
Green (Power)
Left margin correction
Not used in servicing.
15 times or
more
Orange (Alarm) Return to the menu
selection
Time(s)
LED indication
Destination
CD / DVD print
0 times
Green (Power)
No change of the destination
1 time
Orange (Alarm) Japan
Supported
2 times
Green (Power)
Korea
Not supported
3 times
Orange (Alarm) US
Not supported
4 times
Green (Power)
Europe
Supported
5 times
Orange (Alarm) Australia
Supported
6 times
Green (Power)
Asia
Supported
7 times
Orange (Alarm) China
Supported
8 times
Green (Power)
Taiwan
Supported
9 times or
more
Orange (Alarm) Return to the menu selection
1-26
Once in the service mode: Press the On/Off
button 2x after pressing the Stop button 4x.
Summary of Contents for iP6600D - PIXMA Color Inkjet Printer
