Canon iP5200R - PIXMA Color Inkjet Printer, Service Manual

Page: 29 / 64

(3) Waste ink counter setting
When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste
ink amount, replace the waste ink absorber (ink absorber kit). The standard amount for waste ink
absorber replacement is given in the table below.
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3.3. Adjustment / Settings, (5) Service mode, for details.]
(4) User mode
<Standalone printer operation>
1) Turn on the printer.
Waste ink amount
*1
Ink absorber kit replacement
Less than 7% Not required.
7% or more Required.
Function Procedures Remarks
Print head manual
cleaning - Cleaning both black and color:
See "Standalone printer operation"
below.
- Cleaning black or color separately, or
both black and color:
Perform from the printer driver
Maintenance tab.
Print head deep cleaning - Cleaning black or color separately, or
both black and color:
Perform from the printer driver
Maintenance tab.
Paper feed roller
cleaning See "Standalone printer operation"
below.
Nozzle check pattern
printing - See "Standalone printer operation"
below.
- Perform from the printer driver
Maintenance tab.
Print head alignment - See "Standalone printer operation"
below.
- Perform from the printer driver
Maintenance tab.
(Automatic head alignment, Manual
head alignment)
In Custom Settings of the printer
driver Maintenance tab, manual
print head alignment (by
selecting the optimum values) as
with the conventional models can
be performed.
Bottom plate cleaning Perform from the printer driver
Maintenance tab. Cleaning of the platen ribs when
the back side of paper gets
smeared.
Print head replacement The print head is replaceable at the
same position as for ink tank
replacement. (Open the access cover.
When the carriage stops at the center,
the print head can be replaced.)
1-24