Canon iP5200R - PIXMA Color Inkjet Printer, Service Manual

Page: 12 / 64

*1: Only for models supporting CD / DVD printing
*2: Only for models not supporting CD / DVD printing
2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green
(Power LED), or Alarm LED Lit in Orange)
button to eject the paper being used at
error occurrence. Printing will resume
from on the front side of the next page. paper at error
occurrence is
skipped (not
printed).
11 times
Failed in automatic print head
alignment. [2500] Press the Resume/Cancel button.
- If paper is being fed at error
occurrence, the error is indicated after
the paper is ejected.
- If the error occurs, the print head
alignment values are not changed.
- After exit from the error by the
Resume/Cancel button, the automatic
print head alignment will not be re-
done.
The error is
indicated when
the pattern is not
printed due to no
ink or non-
ejection of ink, or
when the
sensor's AD
value is
incorrect.
13 times
The remaining ink amount
unknown. [1683] An ink tank which has once been empty
is installed. Replace the applicable ink
tank with a new one. Printing with a
once-empty or
refilled ink tank
can damage the
print head.
If printing is
continued without
replacing the "no-
good" ink tank,
press the
Resume/Cancel
button for 5 sec.
or longer to
record the use of
a refilled ink tank.
Note:
After the above
operation, the
function to detect
the remaining ink
amount is
disabled.
14 times
Ink tank not recognized. [1684] A non-supported ink tank is installed
(the ink tank LED is turned off). Install
the supported ink tanks.
15 times
Ink tank not recognized. [1410
to 1419] An error occurred in an ink tank (the ink
tank LED is turned off). Replace the ink
tank(s).
No
blinking Access cover open. [1200] Close the access cover.
Cycles of
blinking in
orange (Alarm
LED) and
green (Power
Error [Error code]
Solution
(Replacement of listed parts, which are likely to be faulty)
1-7