(3/22)
1. SERVICE MODE
For details of each service mode, refer to the "
iP100 Service Manual
."
< Service Mode Operation Procedures >
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
Power button. (DO NOT release the buttons). The Power LED lights in green to indicate that a
function is selectable.
2) While holding the Power button, release the Resume/Cancel button after the Power LED lights in
green. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both
the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the
Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified number of
time(s) according to the function listed below, then press the Power button. (Each time the
Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and
Power in green, starting with Alarm LED.)
Time(s)
Function
0 times
Soft-power-off (Even when the print head is not installed, the carriage returns
and locks in the home position capped.)
1 time
Service test print
2 times
EEPROM information print
3 times
EEPROM initialization
4 times
Ink absorber counter resetting
5 times
Destination settings
6 times
Print head deep cleaning
7 to 9 times
Return to the menu selection
10 times
LF / Eject correction
11 to 12 times
Return to the menu selection
13 times
Ink absorber counter setting
14 times or more
Return to the menu selection
(If the Resume/Cancel button is pressed 14 or more times, the Power LED
lights steadily without any changes.)
< Service Test Print >
1) EEPROM information contents
On the service test print (sample below), confirm the EEPROM information.
- Top area:
iP100:
Model name
M=V x.xx:
ROM version
USB=(xxxxxx):
USB serial number
TIC=xxxxxxxx:
Timer IC information
SET=JPN:
Destination
- Bottom area: FA=xx xx xx xx:
Process inspection information
iP100JPN(under the bar code): Model name and Destination
2) Print check items
On the service test print (sample below), confirm the following items:
- Check 1:
Top of form accuracy, skewed paper feeding, left margin, and carriage (outermost)
Summary of Contents for iP100 - PIXMA Color Inkjet Printer
Page 16: ...16 22 6 BLOCK DIAGRAM...
