![background image](http://html.mh-extra.com/html/canon/inner-finisher-d1/inner-finisher-d1_installation-procedures-manual_62334015.webp)
15
15
27) Open the finisher front cover. Then fix the support cover (Left) and the support cover.
28) Set the supplied staple cartridge into the stapler.
29) Restore the link of the toner supply cover and close the cover. Then close all the other
covers.
F-1-30
30) The following parts are no longer reused. Do not leave them at installation site.
[1]
[2]
[3]
[4]
[5]
[7]
[6]
[1] Delivery tray
1pc.
[2] 2nd delivery tray
1pc.(*1)
[3] Reversal guide
1pc.(*1)
[4] Delivery tray positioning guide.
1pc.
[5] Delivery rear cover (upper)
1pc.
[6] Delivery rear cover (lower)
1pc.
[7] Sensor flag
1pc.(*2)
*1 only when the part is installed in the host machine
*2 2 pcs. only when the Inner 2Way Tray is installed in the host machine
Check After Installation
1) Plug in the host machine and turn the main power switch ON.
2) Make several test copies.
3) Confirm the copies have been delivered without failure.
F-1-31
T-1-1