Canon IMAGERUNNER ADVANCE C5051, Getting Started

Page: 61 / 252

2
Flow of Settings
Operations Required to Use the Machine
2-11
Printing from a Computer
The following operations and settings are required to print from a computer with the machine.
For information on the system requirements for using this function, see “Printing or Sending a Fax from a Computer,” on p. 4-2.
1
Connect the machine to a computer .
To connect via a network
See “Connecting to a Network,” on p. 5-3.
See “Interface Settings,” on p. 5-9.
See “Communication Environment Setup,” on p. 5-11.
To connect via USB*
See “Connecting to a USB Interface,” on p. 5-5.
*In this case, proceed to step 3 after connecting the machine.
2
Set the machine for the type of network you are using .
For a TCP/IP network
See “TCP/IP Network Setup Procedures,” on p. 6-2.
See “Protocol Settings,” on p. 6-3.
For a NetWare network
See “NetWare Network Setup Procedures,” on p. 7-2.
See “Protocol Settings,” on p. 7-3.
For an SMB/CIFS network
See “SMB/CIFS Network Setup Procedures,” on p. 8-2.
See “Protocol Settings,” on p. 8-3.
For an AppleTalk network
See “AppleTalk Network Setup Procedures,” on p. 9-2.
See “Protocol Settings,” on p. 9-3.
3
Install the printer driver in the computer to use .
See Chapter 12, "Before Printing from Computers."