Canon IMAGERUNNER ADVANCE C5051, Getting Started

Page: 110 / 252

6
Using a TCP/IP Network
TCP/IP Network Setup Procedures 6-2
TCP/IP Network Setup Procedures
To use a TCP/IP network, it is necessary to perform the following procedures.
1
Protocol Settings (See “Protocol Settings,” on p . 6-3 .)
Specify the protocol settings. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
Canon utilities
•
•
•
2
Computer Settings for Printing/Sending a Fax (See e-Manual > Network .)
Specify the settings for each computer you use for printing or sending a fax. (Optional equipment is required to print or send a fax from a computer. For the equipment
needed, see “Optional Equipment and System Requirements for Connecting to a Network,” on p. 4-2.)
3
Computer Settings for a File Server (See “Setting Up a Computer as a File Server,” on p . 6-29 .)
Specify the settings of the computer receiving data sent from the machine.
It is recommended that steps 1 and 3 above be performed by the network administrator.
The machine or printing equipment does not come with printer driver software that can be used on a UNIX platform. (Use LPD to set up a
printer in UNIX.)
As the fax option does not come with fax driver software for the UNIX platform, it is not possible to send a fax from a UNIX platform.
If you are using the imagePASS or the PS-GX, see the manual provided with the imagePASS or the PS-GX.
If you are using the imagePASS or the PS-GX, some functions are not available with this machine. For details, see the manual provided with
the imagePASS or the PS-GX.
A pre-determined port must be opened in order to initiate network communication using TCP/IP. The required port can be opened by
selecting [On] for all of the [Network] settings in the machine. It is recommended that any unused functions be set to [Off]. When a port is
opened, it is possible for a third person to gain unauthorized access.
•
•
•
•
•
•