Canon IMAGERUNNER ADVANCE C5051, Getting Started

Page: 104 / 252

5
Settings Common to the Network Protocols
Communication Environment Setup 5-14
An SNMP v. 3 user with the following settings is registered by default. Delete or change these settings as necessary.
User: initial
MIB Access Permission: Read/Write
Security Settings: Auth. Yes/Encry. Yes
Authent. Algorithm: MD5
Authent. Password: initial
Encryption Password: initial
If you want to add an SNMP v . 3 user:
Press [User Settings]
→
[Register]
→
specify the user name, MIB permissions, and security settings.
If you select [Auth. Yes/Encry. Yes] from the Security Settings drop-down list, select the authentication algorithm → enter the
passwords for authentication and encryption. If you select [Auth. Yes/Encry. No] from the Security Settings drop-down list, select
the authentication algorithm → enter the password for authentication.
If you want to confirm or change the SNMP v . 3 user settings:
Press [User Settings] to select the user whose settings you want to confirm or change → press [Details/Edit].
Confirm the displayed information
→
change the settings if necessary.
If you want to delete an SNMP v . 3 user:
Press [User Settings] to select the user whose settings you want to delete → press [Delete].
If you want to change the status of an SNMP v . 3 user:
Press [User Settings]
→
select the user whose status you want to change
→
press [User On/Off].
-
-
-
-
-
-
●
☐
●
☐
●
☐
●
☐