manualshive.com logo in svg

Canon imageRUNNER Advance C2030i, Basic Operation Manual

Share
Download
Canon imageRUNNER Advance C2030i Basic Operation Manual Download Page 22

21

Things You Can Do with the Fax Functions

This section describes the flow of basic fax operations.
An optional product is required to use the Fax function.

Sending a Fax

2

Selecting Function

Select [Fax] from the Main Menu screen.

Press [Fax].

Basic Features screen for [Fax] is displayed.

1

Placing Originals

Place the original in the feeder or on the platen glass.

Placing originals in the feeder

Adjust the slide guides to fit the size of your originals. Neatly place 
your originals with the side to be copied face up.

Placing originals on the platen glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

If a log in screen for Department ID 
Management or SSO-H appears, you must enter 
the applicable authentication information (ID, 
password/PIN). If the Card Reader-C1/Copy Card 
Reader-F1 is installed, first insert a control card.

You can set various facsimile functions. For more 
information, see p. 23 to p. 28 in this manual.

Summary of Contents for imageRUNNER Advance C2030i

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands