manualshive.com logo in svg

Canon imageRUNNER Advance C2030i, Basic Operation Manual

Share
Download
Canon imageRUNNER Advance C2030i Basic Operation Manual Download Page 141

0

Frequen

tly A

sk

ed Q

uestions

Q27 

Can I output paper to a different tray according to the function?

To set:

1.  Press 

.

2.  Press [Function Settings] 

→

 [Common] 

→

 [Paper Output Settings].

3.  Press [Output Tray Settings].
4.  Set the function and tray priority for Tray A, B, and C 

→

 press [OK].

For more information on setting the output tray for each function, see e-Manual > Settings/Registration.

●

A 

You can set the output tray for each function and set priorities for 
outputting paper.

The output trays indicated by Tray A, B, and C differ according to 
the optional product attached to the machine.

*

To set:

Take about five envelopes, fan them, and then stack them together. Place the 
envelopes on a level surface, and press all the way around the envelopes by 
hand to remove any air inside. Open the Multi-Purpose Tray, adjust the slide 
guides, and then load the envelopes, as shown below.

1.  Load the envelopes.
2.  Press [Envelopes] 

→

 select the desired envelope type 

→

 press [OK].

3.  Press [OK].
4.  Press  .

●

ISO-B5

ISO-C5

Nagagata 3 or Kakugata 2

Feeding Direction

ISO-B5

ISO-C5

Nagagata 3 or Kakugata 2

Feeding Direction

Q28 

Can I print on envelopes?

A 

Load the envelopes to print on the Multi-Purpose Tray.

For more information, see e-Manual > Basic Operations.

Summary of Contents for imageRUNNER Advance C2030i

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands