Canon imageRUNNER ADVANCE 8500 III Series, Customer Expectation Document

Page: 64 / 108

imageRUNNER ADVANCE 8500 III Series Customer Expectations Document
Version 1 imageRUNNER ADVANCE 8500 III Series Customer Expectations Document Page 64
Staple Finisher-X1 Table Continued
Item Specifications
Capacity Per Tray Cont’d
Tray Mode Paper Size
C
No
Collating,
Collate,
and
Group
Cascade-
Load LTR:
2,500 sheets (or 12 3/4” (325 mm) in height)
Random-
Load
LTR, EXEC, STMTR:
1,500 sheets (or 7 3/4” (195 mm) in height)
13” x 19”, 12 5/8” x 17 11/16”, 12” x 18”,
11” x 17”, LGL, LTRR:
750 sheets (or 3 7/8” (97 mm) in height)
No Collating, Collate,
and Group with
Different Paper Sizes
750 sheets (or 3 7/8” (97 mm) in height)
Offset Mode
LTR and EXEC:
1,500 sheets (or 7 3/4” (195 mm) in height)
11” x 17”, LGL, and LTRR:
750 sheets (or 3 7/8” (97 mm) in height)
Staple Mode
45
LTR and EXEC:
1,500 sheets/100 sets (or 7 3/4” (195 mm) in
height)
44
11” x 17”, LGL, and LTRR:
750 sheets/50 sets (or 3 7/8” (97 mm) in
height)
Z-Fold Mode
41
11” x 17”: 30 sheets
LGL and LTRR: 10 sheets
Half Fold Mode
41
LTRR: 10 sheets
Max. Stapling Capacity
/Available Staple Size
38
LTR, EXEC: 100 sheets (20 lb bond (80 g/m
2
)), or less than 1/2” (11 mm) in height
98 sheets (20 lb bond (80 g/m
2
)) + 2 sheets (140 lb index (256 g/m
2
))
11” x 17”, LGL, LTRR:
50 sheets (20 lb bond (80 g/m
2
)), or less than 1/4” (5.5 mm) in height
48 sheets (20 lb bond (80 g/m
2
)) + 2 sheets (140 lb index (256 g/m
2
)
Power Source 100-240 V AC, 50/60 Hz, 2.8 A
Maximum Power
Consumption
Approximately 311 W (Including the Puncher Unit)
Dimensions (H x W x D)
41” x 25 3/4” x 30 1/8” (654 mm x 765 mm x 1,040 mm)
When the auxiliary tray is extended:
41” x 30 3/4” x 30 1/8” (1,040 mm x 782 mm x 765 mm)
Weight Approximately 141.1 lb (64 kg)
Installation Space
Including the Main Unit
(W x D)
39
Without the Upright Control Panel:
74 7/8”
16
x 31 3/8” x (1,900 mm x 798 mm)
With the Upright Control Panel:
89 1/4”
32
x 31 1/8” (2,268 mm x 789 mm)
16 When the right cover of the main unit is opened.
32 Measured to the right edge of the Upright Control Panel in the extended position.
38 When the standard staple cartridge is attached, the maximum stapling capacity may vary, depending on the paper
type and weight.
39 When the multipurpose tray and auxiliary tray are extended.
41 The optional Paper Folding Unit-J1 must be attached.
44 If the customer is using Thin Paper or Custom Size Paper (less than 15 lb bond (59 g/m
2
)), the tray can hold
approximately 750 sheets (or 3 7/8” (97 mm) in height).
45 1 Point Front (Diagonal), 1 Point Back (Diagonal), Two Points Center (Parallel).