Canon imageRUNNER ADVANCE 6055 User Manual Download Page 214

Page: 214 / 376

Basic Copying Features

3-2

Making Copies in the

ocal Mode

Basic Copying Features

This section explains the copy operations that
are supported by the Vocal mode.

Before Making Copies

Before making copies, make sure that you
are on the Regular Copy Basic Features
screen.

NOTE

•

If a mode other than the Vocal mode is set,
stop the Voice Navigation mode, and then
select the Vocal mode after restarting the
Voice Navigation mode. (See "Starting and
Stopping the Voice Navigation Mode," on p.
1-57.)

•

If the focus does not appear on the touch
panel display, start the Voice Navigation
mode. (See "Starting and Stopping the
Voice Navigation Mode," on p. 1-57.)

Summary of Contents for imageRUNNER ADVANCE 6055

























































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE 6055

Reviews:

Canon imageRUNNER ADVANCE 6055, User Manual, Page: 214 / 376

Search results

Summary of Contents for imageRUNNER ADVANCE 6055

Reviews: