Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1/Document Insertion/Folding
Unit-F1/Document Insertion Unit-E1
3-13
3
Option
al Equi
pment
Finisher-AD1/Saddle Finisher-AD2/Puncher
Unit-AT1/Document Insertion/Folding Unit-F1/
Document Insertion Unit-E1
The Finisher-AD1 and Saddle Finisher-AD2 are equipped with the following
finishing modes: Collate, Group, Offset, and Staple.
The Saddle Finisher-AD2 is also equipped with the Saddle Stitch mode.
The Puncher Unit-AT1 is equipped with the Hole Punch mode.
The Document Insertion/Folding Unit-F1 is equipped with the C-Fold and Z-Fold
modes.
The Document Insertion/Folding Unit-F1 and Document Insertion Unit-E1 feed
cover sheets when the Cover Sheet Insertion, Cover/Job Separation, or Booklet
(Saddle Stitch Booklet) mode has been set.
IMPORTANT
If the optional Copy Tray-L1 is attached, you cannot attach an optional finisher.
NOTE
•
Either the Finisher-AD1 or Saddle Finisher-AD2 can be attached to the main unit.
•
The Puncher Unit-AT1, Document Insertion/Folding Unit-F1, and Document Insertion
Unit-E1 can be attached only if the Finisher-AD1 or Saddle Finisher-AD2 is attached.
Summary of Contents for imageRUNNER 5075
