46
Copy Card Reader-F1
Item
Specifi cations
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading Direction
Face up
Store/Replay
Replay
Power Source
From the main unit
Dimensions (H x W x D)
1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm) (Excluding the attachment kit and cable)
Weight
Approximately 7.1 oz (200g) (Including the attachment kit and cable)
Super G3 FAX Board-AK1
NOTE
Specifi cations remain the same even when the Super G3 2nd Line Fax Board or Super G3 3rd/4th Line Fax Board is installed.
Item
Specifi cations
Telephone Line Used
*1
Public Switched Telephone Network
Scan line Density (Scan,
Transmission)
Normal: 8 pels
*2
/mm x 3.85 line/mm
Fine: 8 pels
*2
/mm x 7.7 line/mm
Super-Fine: 8 pels
*2
/mm x 15.4 line/mm
Ultra-Fine: 16 pels
*2
/mm x 15.4 line/mm
Transmission Speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Sizes
11" x 17" to STMTR
Receiving Paper Sizes
11" x 17" to STMTR
Transmission Times
ECM-MMR: Approximately 3.2 seconds
G3MR method: Approximately 13 seconds
G3MH method: Approximately 13 seconds
JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations (including destinations stored in one-touch buttons)
Image Memory
Approximately 6,000 pages
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use
facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
