Canon ImageRunner 4051 Operating Manual Download Page 23

21

•  The fi xing unit and its surroundings inside the machine may become hot during use. When removing jammed 

paper or when inspecting the inside of the machine, do not touch the fi xing unit and its surroundings, as doing 
so may result in burns or electrical shock. 

•  When removing jammed paper or when inspecting the inside of the machine, do not expose yourself to the heat 

emitted from the fi xing unit and its surroundings for a prolonged period of time. Doing so may result in low 
temperature burns, even though you did not touch the fi xing unit and its surroundings directly. 

•  If a paper jam occurs, follow the directions on the touch panel display to remove any jammed paper from inside 

the machine. Do not insert your fi ngers into any parts not indicated on the touch panel display, as doing so may 
result in personal injury or burns. 

 

 

•  When removing jammed paper or replacing the toner cartridge, take care not to allow the toner to come into 

contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them 
immediately with cold water. Washing them with warm water will set the toner, and make it impossible to 
remove the toner stains. 

•  When removing paper which has become jammed inside the machine, remove the jammed paper gently to 

prevent the toner on the paper from scattering and getting into your eyes or mouth. If the toner gets into your 
eyes or mouth, wash them immediately with cold water and immediately consult a physician. 

•  When removing jammed originals or paper which has become jammed inside the machine, take care not to cut 

your hands or injure yourself on the edges of the originals or paper. If you cannot remove the paper, contact your 
local authorized Canon dealer. 

•  When removing a used toner cartridge, remove the cartridge carefully to prevent the toner from scattering and 

getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold 
water and immediately consult a physician. 

•  Do not dismantle the toner cartridge, as doing so may cause toner to fl y out and enter your eyes or mouth. 

If toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a 
physician. 

•  If toner escapes from the toner cartridge, make sure not to ingest the toner or allow it to directly touch your skin. 

If toner touches your skin, wash it away with soap and water. If your skin still feels irritated after washing it, or 
you ingest toner, consult a doctor immediately. 

Summary of Contents for ImageRunner 4051

























































Reviews: