User Settings
5-7
5
Customizin
g F
a
x Se
tting
s
Printing the TX Terminal ID
The TX Terminal ID setting enables you to specify whether the sender information
is printed at the top of every document you send via fax. Information, such as your
fax number and name is printed, enabling the recipient to know who sent the
document.
IMPORTANT
In the United States, this setting must be set to 'On'. Please see "FCC (Federal
Communications Commission)," on p. xiii, and "Things You Must Do Before Using This
Machine," on p. 1-10 for details on FCC rules governing the use of facsimile equipment in
the United States.
NOTE
•
If you set TX Terminal ID to 'On', you can also set the position of the Terminal ID
information which is printed on the recipient's paper.
•
The default settings are:
1
Press
(Additional Functions)
➞
[Custom Fax Settings]
➞
[User Settings].
If necessary, see the screen shots in steps 1 and 2 of "Registering the Standard
Key," on p. 5-4.
- TX Terminal ID:
On
- Printing Position:
Outside
- Display Destination Name:
On
- Telephone # Mark:
FAX
Summary of Contents for imageRUNNER 2830
