Updates Regarding Additional Functions
1
Enabling SSL Communication for the Remote UI
SSL (Secure Sockets Layer) is now available for accessing the machine securely from a web browser
(Remote UI).
To make changes to the System Settings, enter the System Management mode. For details, see Chapter 1,
“Before You Start,” in the
System Settings Guide.
Setting the Default Key for SSL Communications
Follow the procedure below to set the default key for SSL communications.
Before you start setting the default key for SSL communications, make sure to perform the following:
Generate an SSL key pair. (See “Generating a Key Pair for SSL Communications,” on p. 9.)
Access the Remote UI On/Off settings and make sure that the Use SSL setting is set to ‘Off’. (See “Restricting
the Use of Remote UI,” on p. 15.)
Changes made to SSL Settings become effective when the machine is restarted. To restart the machine, turn it
OFF, wait at least 10 seconds, and then turn it ON.
1
Press
(Additional Functions)
→
[System Settings]
→
[Network Settings] .
2
Press [TCP/IP Settings] .
3
Press [ ] or [ ] until [SSL Settings] appears
→
press [SSL Settings] .
•
-
-
•
