Canon imageRUNNER 2206 User Manual Download Page 134

Page: 134 / 235

Countermeasures for Each Message

3EEJ-04S

If the memory is full or you encounter operation problems, a message appears on the display. Find out more

information about messages in the following list.

Could not perform cleaning.

Paper jammed during cleaning.

●

Remove the jammed paper, set paper correctly, and perform cleaning again.

Clearing Jams(P. 121)

The amount of toner required for cleaning the fixing assembly is insufficient.

●

Cleaning requires toner. Replace the toner cartridge, and perform the cleaning again.

Replacing the Toner Cartridges(P. 159)

Insert the drum unit.

The drum unit is not inserted.

●

Insert the drum unit.

How to Replace the Drum Unit(P. 166)

No Paper: XXXX

<Drawer 1> or <Multi-Purpose Tray> is displayed for XXXX.

Paper is not loaded in the paper drawer or the multi-purpose tray.

●

Load the paper.

Loading Paper(P. 20)

Paper on which reports or lists can be printed is not loaded.

●

Reports or lists can be printed on A4 or Letter size paper. Load A4 or Letter size paper and set its size.

Loading Paper(P. 20)
Specifying Paper Size and Type(P. 34)

Paper jammed.

Paper jams.

●

Remove the jammed paper, and print again (Printing may resume automatically).

Clearing Jams(P. 121)

Troubleshooting

130

Summary of Contents for imageRUNNER 2206












































































































































































































































Search results

Summary of Contents for imageRUNNER 2206

Reviews:

Brands by name

Popular brands

Canon imageRUNNER 2206, User Manual

Search results

Summary of Contents for imageRUNNER 2206

Reviews:

Brands by name

Popular brands