manualshive.com logo in svg

Canon imageRUNNER 2200, Service Manual, Page: 24 / 31

Share
Download
Canon imageRUNNER 2200 Service Manual Download Page 24

imageRUNNER 2200/2800 Series Service Guide

 

imageRUNNER 2200/2800 Series Service Guide 

Rev. 0

 

June 2001

  

Page 19 

 

 

C. 

Internet Systems And Technical Support 

Canon U.S.A. Systems And Technical Support Division also provides the 
online technical e-support center at http://www.support.cusa.canon.com. 
The e-support center is your total support resource for Software and 
Connectivity Support, Hardware Services and digital connectivity 
Educational Programs.  The online technical support includes complete 
documentation, downloads and a comprehensive database of common 
problems and solutions 24 hours a day, 7 days a week.  
If you do not already have access to the Canon e-support center, you can 
register by contacting the Technical Support Center during the business 
hours of 9AM to 8PM Eastern Time at 1-800-528-2830. 

D. 

Recommended Monthly Print/Copy Volume  

Suggested maximum monthly print/copy volume is: 

• 

imageRUNNER 2200 

Up to 75,000 copies 

• 

imageRUNNER 2800 

Up to 100,000 copies 

The optimum performance range is: 

• 

imageRUNNER 2200 

Approximately 3,000 ~ 30,000 copies per month 

• 

imageRUNNER 2800 

Approximately 5,000 ~ 35,000 copies per month 

E. Warranty 

Conditions 

1. End-User Warranty Conditions 

• 

imageRUNNER 2200/2800 Series Limited Warranty

 

90 days after delivery to the original purchaser or 100,000 
prints/copies, or a combination of both, whichever comes first. 

• 

GPR-6 Drum Unit Limited Warranty 

Full Credit: 

12,000 copies or 30 days from the date of original 
purchase, whichever comes first. 

Prorated Credit: 

44,000 or one year from the date of original 
purchase, whichever comes first. 

2. Warranty Administration Reduction Program (WARP) 

Dealers purchasing an imageRUNNER 2200/2800 will receive WARP 
credit during the month following their purchase.  The credit will cover 
the dealer’s cost for defective parts with a dealer cost under $300 
replaced during the term of the end-user warranty.  Defective parts 
having a dealer cost over $300 that were replaced during the term of 
the end-user warranty should be returned along with all applicable 
documentation to Canon U.S.A. for processing.  Canon's Digital 
Solutions Specialists and Regional Service Managers can answer 
questions on this program. 

Summary of Contents for imageRUNNER 2200
































Reviews:

No comments