manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 585

Maintenance Cartridge

Maintenance Cartridge

Maintenance Cartridge ...................................................................................................................................

585

Replacing the Maintenance Cartridge .............................................................................................................

585

Checking the Remaining Maintenance Cartridge Capacity ..............................................................................

589

When to Replace the Maintenance Cartridge ..................................................................................................

590

Maintenance Cartridge

Maintenance Cartridge

When purchasing, check the Model number.

Shape

Model number

MC-10

Note

•

For instructions on replacing the Maintenance Cartridge, 

see "

Replacing the Maintenance Cartridge

."

➔

P.585

•

The MC-09 can also be used.
However, the Shaft Cleaner included with the MC-09 cannot be used with this printer.

Replacing the Maintenance Cartridge

Replacing the Maintenance Cartridge

Compatible maintenance cartridges

For information on compatible maintenance cartridges, 

see "

Maintenance Cartridge

."

➔

P.585

Precautions when handling the Maintenance Cartridge

Take the following precautions when handling the Maintenance Cartridge.

Caution

•

For safety, keep the Maintenance Cartridge out of the reach of children.

•

If ink is accidentally ingested, contact a physician immediately.

Important

•

Do not remove the Maintenance Cartridge except to replace it. Ink may leak out.

•

Do not remove an Maintenance Cartridge during initialization immediately after turning on the printer, during
Printhead cleaning, while ink is being drawn out, or during initialization immediately after replacing the Mainte-
nance Cartridge.
The Maintenance Cartridge may become damaged or ink may leak out.

•

To prevent ink from leaking from a used Maintenance Cartridge, avoid dropping the cartridge or storing it at an
angle. Otherwise, ink may leak and cause stains.

•

Ink adheres to the top of the Maintenance Cartridge after it has been used. Handle the Maintenance Cartridge
carefully during replacement. The ink may stain clothing.

iPF840

                                                                                                                                                                                           

Maintenance Cartridge

User's Guide

                                                                                                                                                                                                                      

 

 

Maintenance and Consumables

Maintenance Cartridge

585

 

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands