Canon imagePROGRAF W2200S User Manual Download Page 88

Page: 88 / 107

NetBIOS/NetBEUI Network Settings (Windows Me/Windows 98/Windows 95)

5-4

Note

Installing the Printer Driver

The printer driver is required for printing. Install the printer driver. (

Setup

Guide).

During installation use Add Printer on the Local or Network Printer screen
to select Local Printer. Do not select Network Printer.

The port used by the printer changes after installation, so select LPT1 or any
desired port.

Setting the Printer Port

Follow the procedure below to select the port for the printer connection.

Install the NetBIOS/NetBEUI Port Monitor from the provided User
Software CD-ROM.

Mount the provided User Software CD-ROM in the CD-ROM
drive.

On the desktop, double-click the My Computer icon, double-
click the CD-ROM Disk icon, then from the File menu select
Open.

Open the Portmon folder.

Double-click the Setup (Setup.exe) file.

The installation program begins. Follow the instructions on the
screen to complete the installation.

In some operating environments, the Setup Menu window appears as soon as the
User Software CD-ROM is mounted in the CD-ROM drive. If this occurs, click the
Quit button then follow the procedure above.

Summary of Contents for imagePROGRAF W2200S












































































































Search results

Summary of Contents for imagePROGRAF W2200S

Reviews:

Related manuals for imagePROGRAF W2200S

Brands by name

Popular brands

Canon imagePROGRAF W2200S, User Manual

Search results

Summary of Contents for imagePROGRAF W2200S

Reviews:

Related manuals for imagePROGRAF W2200S

Brands by name

Popular brands