Canon imagePROGRAF iPF6200, Service Manual

Page: 328 / 692

Chapter 4
4-20
c) Points to note on Disassembly an Reassembly of Cutter unit
1) When disassembling or reassembling the cutter unit, align the cutter unit roller with the grooves[1] in the cutter lifter unit and cutter drive unit.
F-4-38
d) Removing the cutter mounting plate
1) Remove the cutter unit.
2) Remove the two screws[1] and connector[2] and free the harness from harness guide[3] to remove the cutter mounting plate[4].
F-4-39
e) Removing the cutter drive unit
1) Remove the cutter unit.
2) Remove the two screws[1] and two connectors[2] and free the harness from harness guide [3] to remove the cutter drive unit[4].
F-4-40
[1]
[1]
[1]
[2] [3] [4]
[1]
[2]
[3]
[4]