●
Follow the guidelines below to perform adjustment.
- <Adjustment Level>: Increasing this in the positive direction increases the effect for tail end image
problems. Increasing the value too high may cause toner to be missing in high density areas.
- <Correction Amount>: Increasing this in the positive direction increases the distance where control is
performed from the tail end of the paper in the lead edge direction when seen from the tail end of the
paper. The distance increases in 1 mm increments.
●
If performing adjustment does not improve the problem, adjust <Adjust Secondary Transfer Voltage> or
<Adj. Lead Edge Sec. Transfer Volt.>. In this case, decreasing the secondary transfer voltage from the current
value can have an effect, but adjustment should be performed gradually as it may affect the image.
◼
Settings/Registration Table
For details on how to view the Settings/Registration Table, see "Settings/Registration" "Settings/Registration Table"
in the "User's Guide."
Item
Setting
Description
DeviceAdmin NetworkAdmin Can be
set in
Remote
UI
Device
Information
Delivery
Available
Import
All
Function
Name of
Item When
Exporting
with the
Remote UI
<Paper Type Management
Settings>
<Details/Edit>
●
<Name>,
<Category>,
<Basis
Weight>,
<Finish>,
<Type>,
<Color>, <Use
as Template
Paper>, <2nd
Side of 2-
Sided Page>,
<Adjust
Image
Position>,
<Adjust Creep
Correction>,
<Adjust
Gloss>, <Adj.
Secondary
Transfer
Voltage>,
<Adj. Lead
Edge Sec.
Transfer
Volt.>,
<Correct Tail
End Toner
Application>,
<Toner
Amount
Reduction
Mode>
Yes
No
Yes
No
C
*
Paper Type
Management
Settings
Changes to Settings/Registration
60